e-STUDIO200L/202L/203L/230/232/233/280/282/283 © 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
DRUM RELATED SECTION
11 - 20
[R] Temperature/humidity sensor
(1) Take off the inner tray
( P.2-35 "[K] Inner tray").
(2) Lift the duct and disconnect 1 connector.
Fig. 11-38
(3) Disconnect 1 connector, remove 1 screw and
take off the temperature/humidity sensor
cover.
Fig. 11-39
(4) Remove 1 screw and take off the tempera-
ture/humidity sensor.
Fig. 11-40
Duct
Connector
Screw
Temperature/humidity
sensor
To Next Page
Loading...
