Toshiba e-STUDIO233 - Setup Flow for FTP Printing

2
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/232/233/280/282/283
OUTLINE OF THE MACHINE
2 - 31
[B] Front left cover
[C] Rear cover
(1) Open the front cover.
(2) Remove 1 screw. Pull out the front left cover
to the front side, and then take it off by sliding
it to the right side.
Fig. 2-25
(1) Remove 7 screws and take off the rear
cover.
Fig. 2-26
Front left cover
Rear cover