2
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/232/233/280/282/283
OUTLINE OF THE MACHINE
2 - 53
[B] KD-1011 (Paper Feed Pedestal (PFP))
(1) Turn the power OFF and unplug the power
cable.
(2) Remove 1 screw and take off the connector
cover.
Fig. 2-75
(3) Remove 1 screw and the ground wire, and
then disconnect 2 connectors (3 connectors
if the optional damp heater is installed).
Fig. 2-76
(4) Take off the lower drawer of the equipment
and PFP upper drawer.
Fig. 2-77
Connector cover
Connector of optional
damp heater
Drawer
04/07
To Next Page
Loading...
