1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 43
TROUBLESHOOTING FOR THE HARDWARE
3
Open the cover holding the handle of the Bridge Unit.
When the Hole Punch Unit is installed, proceed to step 5.
4
Remove the misfed paper.
Proceed to step 8.
When the Hole Punch Unit is installed
5
Open the Hole Punch Unit cover.
6
Turn the green knob to get the misfed paper out.
Be sure to turn the knob to the direction indicated by the arrow to remove the misfed paper. If you pull out the
paper forcibly without turning the knob, this may tear the paper.
To Next Page
Loading...
