56 Other Installations
0.Other Installations
The following printing environments cannot be configured by installation using Software Installer or the individual
installers contained in the Install Disc (except USB printing in Windows 7 or later / Windows Server 2012 or later).
When you want to configure the following printing environments, see the following pages for each procedure.
P.56 “Raw TCP/LPR printing (“Add Printer” installation from file)”
P.62 “USB printing”
P.67 “IPP printing”
P.72 “Novell iPrint”
P.73 “Web Service Print”
Raw TCP/LPR printing (“Add Printer” installation from file)
This section describes how to set up the printer drivers for Raw TCP/LPR printing by using Add Printer Wizard.
Before installing the printer driver, check with your system administrator to make sure of the following:
This equipment is connected to the network and turned on.
The TCP/IP setting is correct on this equipment and your computer.
To perform installation, you must log onto Windows with the “Administrator” account.
1
Open the printers folder.
Right-click [Start], then click [Control Panel] > [View devices and printers].
For Windows 8.1 / Windows Server 2012, right-click in the lower left of the screen, then click [Control Panel] >
[Devices and Printers].
For Windows 7, click [Start] > [Devices and Printers].
For Windows Vista / Windows Server 2008, click [Start] > [Control Panel] > [Hardware and Sound] > [Printers].
2
Click [Add a printer].
To Next Page
Loading...
