Toshiba e-STUDIO257 - Adjusting Sharpness; Adjusting Color Balance; Rgb Adjustment

3 USEFUL FUNCTIONS
60 Changing Scan Settings
 Adjusting sharpness
The sharpness setting determines whether your scans look clear or blurry. Use and to select the
preferable setting from 9 levels.
 Adjusting color balance
The color balance of your scans can be adjusted with the saturation and RGB adjustment settings.
The page shown in the above figure is available only when [FULL COLOR] or [AUTO COLOR] is selected
for the color mode setting.
 Saturation
Use and to manually specify the saturation level.
 RGB adjustment
Use and to manually specify the density level for each color: red (R), green (G), and blue (B).
To reset all of the color balance settings back to the defaults, press [RESET].