EasyManua.ls Logo

Toshiba E-STUDIO3005AC - Clearing a Staple Jam; Finisher

Toshiba E-STUDIO3005AC
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
66 Clearing a Staple Jam
0.Clearing a Staple Jam
When a staple jam has occurred in the stapler of the finisher or saddle stitch unit, clear the jam following the
procedure below.
P.66 “Finisher”
P.71 “Saddle Stitch unit”
Finisher
Finisher / Saddle Stitch Finisher
1
Open the front cover of the finisher.
2
Remove the staple cartridge.
3
Lower the guide while holding the knob.
Do not touch the stapling area.
The actual needle point could cause you personal injury.

Table of Contents

Other manuals for Toshiba E-STUDIO3005AC

Related product manuals