2.USING TEMPLATE BUTTONS
24 Changing Data
Changing template data
1
In the template menu, select the group to which the desired template is registered.
To select the desired group, press the [Registration] tab > desired group > [Open].
Entering a 3-digit number in [Group Number] displays a corresponding group.
2
Enter the password as follows and then press [OK].
When the public template group is selected: Enter the Admin Password (6 to 64 characters).
When a private group is selected: Enter the password (up to 20 characters). If no password is set, go to step 3.
3
Select the desired template and press [Edit].
4
Key in the password for the selected template. (If no password is set, go to step 5.)
5
Change the data following step 6 on P.13 “Registering templates in the public template group
(administrators only)”.
To Next Page
Loading...
