Toshiba E-STUDIO3008A - User Functions

1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 31
TROUBLESHOOTING FOR THE HARDWARE
2
Check that the guide width is correct, there is no folded/curled paper or overloading, and then
close the drawer.
 Drawers (Except for e-STUDIO2000AC/2500AC)
1
Open the paper source drawer, and remove the misfed paper.
2
Check that the guide width is correct, there is no folded/curled paper or overloading, and then
close the drawer.
Reuse paper drawer for the e-STUDIO5008LP Series
Be sure that the height of the stacked paper does not exceed the line indicated inside of the side guides.