Toshiba E-studio3055c Troubleshooting Guide

1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 25
1 TROUBLESHOOTING FOR THE HARDWARE
7
Close the automatic duplexing unit cover.
 Paper misfeed in the Bridge Kit
3
Close the Bridge Kit cover.
 Paper misfeed in the Finisher and the Hole Punch Unit
Paper misfeed in the upper receiving tray
6
When the finisher is installed, close the Bridge Kit
cover.
1
Open the cover holding the handle of the Bridge Kit.
2
Remove the misfed paper inside the Bridge Unit.
If the misfed paper cannot be removed because the right side is
caught by the fuser unit, follow the steps on  P.23 “Paper misfeed
in the fuser unit”.
1
Raise the lever and open the upper receiving tray of
the finisher.
2
1

Toshiba E-studio3055c Specifications

General

Brand	Toshiba
Model	E-studio3055c
Category	All in One Printer
Language	English