1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 39
1 TROUBLESHOOTING FOR THE HARDWARE
10
Remove the misfed paper and then close the upper
cover.
11
While holding the green lever, open the Hole Punch
Unit to remove the misfed paper.
12
Return the Hole Punch Unit to its original position.
13
Carefully return the finisher to its original position.
Do not put your hand or fingers on the top of the finisher when
closing it.
They could be caught and this could injure you.
14
Close the front cover of the finisher.
2
1
To Next Page
Loading...
