2.PRINTING FROM WINDOWS
Printing With Best Functions for Your Needs 125
2 PRINTING FROM WINDOWS
8
To rotate the watermark, enter the number of degrees in the [Angle] box.
You can enter from -90 degrees to 90 degrees in units of 1 degree in the [Angle] box.
You can also set the angle using the scroll bar.
9
Select how the watermark text is printed from [Solid], [Draw as Outline], and
[Transparency].
Solid — Select this to print a solid type of watermark.
Draw as Outline — Select this to print an outline type of watermark.
Transparency — Select this for a transparent watermark. Set the transparent ratio from 0 to 100% in
units of 1%. You can also set the transparent ratio using the scroll bar.
10
Click [OK] to save the watermark settings.
The watermark is added or edited.
Deleting a watermark
You can delete the default watermarks. However, they cannot be restored by clicking [Restore Defaults].
1
Select the watermark that you want to delete at the [Watermark] box.
2
Click [Delete].
The [Confirm Delete] dialog box appears.
3
Click [Yes].
The watermark is deleted.
To Next Page
Loading...
