2.PRINTING FROM WINDOWS
Setting Up Print Options 45
2 PRINTING FROM WINDOWS
[Finishing] tab
The [Finishing] tab allows you to enable sort printing, 2-sided printing, N-up printing, poster printing, stapling
and punching.
1) Copy Handling
This sets how to sort the printed sheets when numerous copies are made for printing.
- Sort Copies
— Select this for sort-printing (1, 2, 3... 1, 2, 3...).
- Group Copies — Select this for group-printing (1, 1, 1... 2, 2, 2... 3, 3, 3...).
- Rotated Sort Copies — Select this for rotate sort-printing.
[Rotated Sort Copies] cannot be selected on some models.
[Group Copies] and [Rotated Sort Copies] can be selected only when more than 1 copy is entered at
the Number of Copies option.
[Rotated Sort Copies] can be selected only when [Letter], [A4], [B5], or [16K] is selected at the Print
Paper Size option. When you use the “Rotated Sort Copies” option, place copy paper of a desired
size in two drawers (portrait and landscape directions) before you start printing. Select one paper
size from [Letter], [A4], [B5] and [16K], and then place the selected paper in two drawers, the Large
Capacity Feeder trays or the External Large Capacity Feeder tray in different directions (e.g. A4 and
A4-R) in advance.
To Next Page
Loading...
