Toshiba e-STUDIO330AC - Home Screen Interface; Job Status Button

Chapter 1 PREPARATIONS
12
You can change the screen displayed when the equipment is turned on to another screen, such as the Copy
function screen. For details, see the following guide:
& TopAccess Guide (PDF) : “Chapter 8: [Administration] Tab Page” - “[Setup] Item List”
Names and Functions on the Home Screen
Displayed when you turn the equipment on or press the [HOME] button. Displays buttons for various
functions.
6
4 51
8
7
3
2
1. Recall button
Register functions, templates, URLs, etc. and
recall them.
& MFP Management Guide (PDF) : “Chapter 4:
APPENDIX”
2. Home Data Sync button
Synchronize the data on the home screen. This
button is displayed when the Public Home
function is enabled.
& TopAccess Guide (PDF) : “Chapter 8:
[Administration] Tab Page” - “[Setup] Item List”
3. Home Setting button
Modify the home screen settings.
& MFP Management Guide (PDF) : “Chapter 4:
APPENDIX”
4. Job Status button
Check the progress of jobs and the process
history.
& Soware Troubleshooting Guide (PDF) :
“Chapter 1: CONFIRMING JOB STATUS ON THE
TOUCH PANEL”
5. [?] (Help) button
Display information on each function.
& P.54 “Using the Help”
6. Next button
Move to the next page.
7. Page Position indicator
Display the current page position.
8. Status button
Displayed when information is available.