Toshiba e-STUDIO330AC - Setting the Printer Driver

1
21
Installing Client Soware
When the installation is complete, click [Finish].
7
Click [Exit] and then [Yes].
8
Setting the printer driver
Before using the printer driver, you must configure the options installed.
Select the [Start] menu > [Settings] > [Devices] > [Devices and printers].
1
Right-click on TOSHIBA Universal Printer 2, and then click [Printer
properties].
2
Obtain configuration data of the options automatically by opening the
[Device Settings] tab menu.
3
Click [OK].
4
A list of discovered printers is displayed.
1
Select this equipment on the list
and
2
click [OK].
6
For details of the recommended installation, see the following guide:
& Soware Installation Guide (PDF) : “Chapter 2: RECOMMENDED INSTALLATION”