3 USEFUL FUNCTIONS
58 Changing Scan Settings
Regardless of the settings, this feature is disabled under the following conditions:
- The Document Cover is closed at the time of scanning.
- The originals are scanned from the Reversing Automatic Document Feeder*.
Set the appropriate exposure manually. Enabling Outside Erase cancels the automatic exposure
adjustment feature.
P.59 “Adjusting exposure”
The feature may not produce an appropriate output when your original contains a concave shaped
image with a dent.
The margins may not be erased correctly under the following conditions:
- Light intrudes into the margin area of the original placed on the Original Glass.
- Hands or fingers holding the original on the Original Glass are scanned.
To use this feature in the models below, specify the original size.
- e-STUDIO2550C Series
P.55 “Specifying original size”
* The Reversing Automatic Document Feeder is optional for e-STUDIO4540C Series, e-STUDIO507 Series, e-STUDIO456 Series,
e-STUDIO2550C Series, e-STUDIO5055C Series, e-STUDIO307LP and e-STUDIO306LP.
To Next Page
Loading...
