EasyManua.ls Logo

Toshiba e-STUDIO400AC - Page 14

Toshiba e-STUDIO400AC
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.TopAccess
14 [Administration] Tab
Setting up Bonjour
In Bonjour, you can enable or disable the Bonjour networking that is available for Mac OS X.
19 SMB Signing of SMB Client Select whether SMB Signing is enabled or disabled when this equipment
accesses the clients using SMB, such as when this equipment stores the
scanned data in the network folder using SMB.
If server agrees, digital signature is done for the communication.
Select this to use the digital signature to secure the communication to an
SMB server only when the SMB Signing of SMB Server that this equipment
accesses is enabled. If the SMB Signing of SMB Server is disabled in an SMB
server, the communication is performed without the digital signature.
Digital signature is always done for the communication on the client
side. — Select this to make this equipment always access an SMB server
with a digital signature. When the SMB Signing of SMB Server is disabled in
an SMB server, the communication is not allowed.
Digital signature isn’t done for the communication for the client.
Select this to communicate to an SMB server without the digital signature.
If the SMB Signing of SMB Server is always enabled in an SMB server, the
communication is not allowed.
If you do not know whether the SMB Signing of SMB Server is enabled or disabled in the SMB servers, it is
recommended to select [If server agrees, digital signature is done for the communication.]. If this is set
incorrectly, the SMB communication may become unavailable.
The digital signature is always done for the communication on the server side as the default on Windows
Server 2012 or later. Therefore specify “If server agrees, digital signature is done for the communication.” or
“Digital signature is always done for the communication on the client side.” for SMB communications with
Windows Server 2012 or later.
Item name Description
1 Enable Bonjour Select whether Bonjour is enabled or disabled. [Enable] is set as the default.
2 Link-Local Host Name Enter the DNS host name of this equipment. You can enter up to 127
alphanumerical characters and symbols other than =, ; (semicolon), #, and \
(backslash).
3 Service Name Enter the device name of this equipment that will be displayed in the Bonjour
network. You can enter up to 63 alphanumerical characters and symbols other
than =, ; (semicolon), #, and \ (backslash).
4 Chrome OS Print Select whether the Chrome OS Print service is enabled or disabled. [Enable] is
set as the default.
Item name Description
1
2
3
4

Other manuals for Toshiba e-STUDIO400AC

Related product manuals