2.TopAccess
[Administration] Tab 17
TopAccess
Certificate management settings
You can manage device certificates and client certificates.
The [Certificate Management] submenu can be accessed from the [Security] menu on the [Administration] tab.
See the following pages for how to access it and information on the [Security] menu:
Setting up Device Certificate
You can configure the device certificate for encrypted communications using wireless LAN, IEEE 802.1X
authentication, IPsec, or SSL/TLS.
Item name Description
1 Destination Set the box to save the received document in the storage area of an
application.
Box Number
Select the box number to save the received document. “000: Public Box” is set
as the default.
Password
Enter the password if it is set for the specified box.
Retype Password
Enter the same password again for a confirmation.
2 Folder Name Enter the folder name in the box where the received document is saved. You
can enter up to 64 characters.
3 Document Name A job ID applied automatically by means of the equipment is displayed. This
cannot be changed.
Item name Description
1 self-signed certificate Creates a certificate for encrypted communications using SSL/TLS on your
device.
[Create] button — Displays the [Create self-signed certificate] screen. Specify
items necessary for the certificate to create the self-signed certificate.
P.18 “[Create self-signed certificate] screen”
[Export] button — Exports the created self-signed certificate.
To Next Page
Loading...
