2.USING TEMPLATE BUTTONS
20 Recalling Templates
Using a meta scan template
When you use a meta scan template, select a template, then enter required information and press [Scan].
To use the meta scan function, the meta scan option is required.
To create a new template for the meta scan function, the setting on TopAccess is required. For more details, refer to
the TopAccess Guide.
Items shown in the figure above are samples. Ask the administrator for items you need to enter.
Required items are marked with asterisks.
Enter each item to set the entry as required.
Using useful templates
This equipment has 12 default templates that can be used immediately. They are registered to the group number 001
“Useful Templates”. For how to recall them, see the following page:
P.18 “Recalling Templates”
To Next Page
Loading...
