Toshiba E-STUDIO4508A - Inner Finisher and Hole Punch Unit

1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 57
TROUBLESHOOTING FOR THE HARDWARE
 Inner Finisher and Hole Punch Unit
1
Lift up the control panel and then open the front cover of the finisher.
2
While holding the green lever, move the finisher to the left until it stops.
3
Pull down the green lever on the right-hand unit of the finisher.
The paper exit of the equipment opens.
4
Turn the green dial clockwise to send the paper and remove it.