1.TROUBLESHOOTING FOR THE HARDWARE
76 Replacing a Toner Cartridge
4
Shake the new toner cartridge strongly with the label surface down to loosen the toner inside.
5
Pull out the seal in the direction of the arrow.
6
Insert the toner cartridge along the rail.
Insert the toner cartridge until it clicks.
7
Carefully pull the cleaner out until it comes to a stop, and then carefully reinsert it straight into
its original position. Repeat this step a couple of times.
Check that the cleaner’s knob is fully inserted after cleaning.
To Next Page
Loading...
