Troubleshooting when the tool does not function
When the tool does not function properly, check the following items.
(1) When the USB memory is not recognized, or the file cannot be read.
If the following screen is displayed, confirm the ‘Items to check’ below.
・ Reinsert the USB memory.
・ Check the folder name and the file name in the folder.
(Refer to " USB Advanced Preparation" above).
・ Re-install the program files on the USB memory.
・ Replace the USB memory.
・ If there is a "SystemRomRecovery" file directly under the USB memory being
used, remove the file or change the file name.
(2) When the files are corrupted
If the following screen is displayed, re-install the program files on the USB
Starting recovery mode...
USB memory is not detected. Please insert the proper USB memory,
To Next Page
Loading...
