130
4.SETTING ITEMS (ADMIN)
3.SETTING NETWORK FUNCTIONS (Cont.)
4
3
Press the [OTHER] button.
• The OTHER screen is displayed.
4
Press the [ENABLE] button to enable the LDAP network service, or
[DISABLE] button to disable it.
• Optionally you can enter the trap community name for the SNMP Traps by pressing the [SNMP READ COM-
MUNITY] button.
When you press this button, the QWERTY Type Keyboard screen is displayed. Enter the value using the key-
board and digital keys, and press the [ENTER] button to set the entry.
5
Press the [ENTER] button.
• Returns you to the NETWORK menu.
6
Continue to another network setting if required, then press the
[APPLY NOW] button.
• The "NETWORK INITIALIZING" message is displayed and this equipment starts initializing the network inter-
face card to apply the changes.
To Next Page
Loading...
Need help?
General
