30 Precautions for Changing the SNMP Settings
0.Precautions for Changing the SNMP Settings
When the SNMP community name or user information is used for authenticating users on your TOSHIBA MFP, the
SNMP settings must be the same in your TOSHIBA MFP and the [SNMP Settings] dialog box as shown below in order to
print or send jobs normally.
For help, consult the administrator.
When SNMP V1 and V2 are configured for your TOSHIBA MFP
When the TCP/IP port is used, the SNMP community names must be the same in the following 3 settings.
1. Your TOSHIBA MFP (Example: Read Community “public” and Read Write Community “private” are set.)
2. [SNMP Settings] dialog box
The Read Write Community names must be the same in your TOSHIBA MFP and the [SNMP Settings] dialog box.
If you specify the incorrect Read Write Community name, the several functions, such as the department
management feature will be disabled.
To Next Page
Loading...
Need help?
General
