4.INSTALLING PRINTER DRIVERS FOR MAC OS
Installing the Printer on Mac OS 97
INSTALLING PRINTER DRIVERS FOR MAC OS
Option setting list
Model Selection
TOSHIBA e-STUDIO5005ACSeries — Select this when e-STUDIO5005AC Series is used.
TOSHIBA e-STUDIO5008ASeries — Select this when e-STUDIO5008A Series is used.
TOSHIBA e-STUDIO7506ACSeries — Select this when e-STUDIO7506AC Series is used.
TOSHIBA e-STUDIO8508ASeries — Select this when e-STUDIO8508A Series is used.
TOSHIBA e-STUDIO5008LP_Loops_LP50Series — Select this when e-STUDIO5008LP Series is used.
Finisher
This sets whether or not the Finisher is installed.
Hole Punch Unit
This sets whether or not the Hole Punch Unit is installed.
Drawers
This sets whether or not the Paper Feed Unit (2nd drawer), Paper Feed Pedestal (3rd drawer) or Drawer Module (4th
drawer) is installed.
External LCF
This sets whether or not the External LCF is installed in the e-STUDIO7506AC Series or the e-STUDIO8508A Series.
Enable Multi Station Print
Select this to enable the Multi Station Print.
Enable Finishing Function
This appears when the e-STUDIO5008LP Series is used.
Select this to enable the finishing functions (stapling, punching or center folding) if you want to print a job using the
erasable blue toner by selecting it in [Erasable Blue] in [Toner Mode].
To Next Page
Loading...
