Toshiba E-studio5540c - Page 61

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE and TROUBLESHOOTING
8 - 60
[E570] Jam not reaching the bridge unit
[E580] Stop jam at the bridge unit
ADU board
Rollers
Classification Error item
Paper transport jam
Check item Measures
Reverse sensor • Sensor check
(Perform the input check: 03-[SCAN]ON/[3]/[F])
• Connector check
• Harness check
Transport entrance motor • Motor check
(Perform the output check: 03-130)
• Connector check
• Harness check
Fuser motor • Motor check
(Perform the output check: 03-129)
• Connector check
• Harness check
DRV board • Connector check (CN537, CN538, CN539)
• Board check
PFC board • Connector check (CN514, CN515)
• Board check
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
Reverse sensor
Transport entrance motor
Fuser motor
DFV board
PFC board
Rollers
Classification Error item
Paper transport jam
Check item Measures
Reverse sensor • Sensor check
(Perform the input check: 03-[SCAN]ON/[3]/[F])
• Connector check
• Harness check
Reverse motor • Motor check
(Perform the output check: 03-132/134)
• Connector check
• Harness check
Replace parts Remarks