8
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
8 - 7
E330 Paper transport jam 4th drawer transport jam (Paper not
reaching the registration sensor): The
paper does not reach the registration
sensor after it has passed the 1st drawer
feed sensor.
P. 8-50
E340 4th drawer transport jam (Paper not
reaching the 1st drawer feed sensor): The
paper does not reach the 1st drawer
transport sensor after it has passed the 2nd
drawer feed sensor.
P. 8-51
E350 4th drawer transport jam (Paper not
reaching the 2nd drawer feed sensor): The
paper does not reach the 2nd drawer
transport sensor after it has passed the 3rd
drawer feed sensor.
P. 8-54
E360 4th drawer transport jam (Paper not
reaching the 3rd drawer feed sensor): The
paper does not reach the 3rd drawer feed
sensor after it has passed the 4th drawer
feed sensor.
P. 8-55
E370 3rd drawer misfeeding (Paper not reaching
the 3rd drawer transport sensor): Paper fed
from the 3rd drawer does not reach the 3rd
drawer transport sensor.
P. 8-55
E380 4th drawer misfeeding (Paper not reaching
the 4th drawer transport sensor): Paper fed
from the 4th drawer does not reach the 4th
drawer transport sensor.
P. 8-56
E3C0 LCF transport jam (Paper not reaching the
registration sensor): Paper fed from the
LCF and passed through the 1st drawer
feed sensor does not reach the registration
sensor.
P. 8-50
E3D0 LCF transport jam (Paper not reaching the
1st drawer feed sensor): Paper fed from the
LCF and passed through the 2nd drawer
feed sensor does not reach the 1st drawer
transport sensor.
P. 8-51
E3E0 LCF transport jam (Paper not reaching the
2nd drawer feed sensor): Paper fed from
the LCF and passed through the LCF feed
sensor does not reach the 2nd drawer
transport sensor.
P. 8-54
E3F0 Tandem LCF misfeeding (Paper not
reaching the tandem LCF feed sensor):
Paper fed from the Tandem LCF does not
reach the tandem LCF transport sensor.
P. 8-57
Error code Classification Contents Troubleshooting