Toshiba e-STUDIO556 - Paper Misfeed in the Drawers

1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 17
1 TROUBLESHOOTING FOR THE HARDWARE
5
Close the transport guide.
7
Lower the original feeder tray.
 Paper misfeed in the drawers
6
Raise the original feeder tray, and remove the original
under the guide plate.
8
Close the upper cover.
2
1
1
Open the paper source drawer, and remove the
misfed paper.
2
Check that the guide width is correct, there is no
folded/curled paper or overloading, and then close
the drawer.
Be sure that the height of the stacked paper does not exceed the
line indicated inside of the side guides.
2
1