Toshiba e-STUDIO556 - Page 23

1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 21
1 TROUBLESHOOTING FOR THE HARDWARE
4
Close the Hole Punch Unit cover.
5
Remove the misfed paper from the entrance of the
finisher.
6
When the Inserter is installed, pull out the lever to
open its inserter cover.
7
Remove the misfed paper and close the inserter
cover.
8
Open the transport guide of the Inserter.
9
Remove the misfed paper and close the transport
guide.
2
1
2
1
2
1