Toshiba e-STUDIO657 - Page 21

2.BASIC OPERATION
Viewing Touch Panel for Scan Menu 19
2 BASIC OPERATION
6) [JOB STATUS]
Press this button when you want to monitor your copy, fax, scan, and/or print jobs or view the job logs.
 P.47 “Viewing the scan job status”
 P.48 “Viewing the scan job log”
7) [SCAN]
Press this button to perform scanning.
8) [PREVIEW]
Press this button when you want to preview your scans.
 P.62 “Previewing Scans”
[PREVIEW] is displayed only when any of the following models is used:
- e-STUDIO6570C Series
- e-STUDIO6550C Series
- e-STUDIO4540C Series
- e-STUDIO2550C Series (only when the hard disk is installed)
- e-STUDIO5055C Series
- e-STUDIO507 Series
- e-STUDIO857 Series
9) [SCAN SETTING]
Press this button to change scan settings applicable to “Scan to e-Filing”, “Scan to File”, “Scan to E-mail”
and “Scan to USB”.
 P.50 “Changing Scan Settings”
10)Scan Settings Display Area
The selected scan settings are displayed.
11)[?] (Help Button)
Press this button for descriptions on each function or button on the touch panel.
12)[TEMPLATE]
Press this button when you want to use a template.
 P.85 “USING TEMPLATES”
13)[SETTINGS]
Press this button to display a list of the selected options for scan settings.