EasyManua.ls Logo

Toshiba ER-GD400C - Cleaning and Maintenance Safety

Toshiba ER-GD400C
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CONTROL PANEL
Time and temperature selection can be
adjusted depending on the menu.
(page 38~50)
Dial Menu /Time/Temperature/Adjusting the finish
Auto menu is adjusted by rotated the knob to preset the time , temperature , finish etc. and the select can be confirmed by pressing
the key.
DIAL MENU
By rotates the knob , It show at menu list 11~40
is used when selecting on door menu (11~37) and cleaning (38~40)
TIME
For setting the manual cooking time as well as increase or decrease the time during cooking.Increases on turning right and
decreases on turning left.
TEMPERATURE
For setting the temperature for manual cooking (Superheated Steam/Convection/Proper Temperature Steam).
For changing the temperature during manual cooking (Superheated Steam/Convection/Proper Temperature Steam).
ADJUSTING THE FINISH
For adjusting the finish during auto menu. [Increases] in strength on turning right and [decreases] in strength on turnung left.
On pressing this button, menu list 1~3 will appear
For reheating rice and dish.
(Page 25~27)
 ※Cooking will start when the button is pressed.
Used for confirm to Start/Restart process in
Button menu (4~10), Dial Menu (11~40).
Navigation Knob and Illumination Guide
For cancel or stop cooking program.
The display shows the auto menu number, cooking mode,
temperature and time.
CONTROL PANEL & DISPLAY
Show the Auto menu list. When the symbol [0] displays on the
control panel, the menu lights up for 1 min after the door
closes. It also lights up when [AUTO MENU] is selected.
The back of KNOB and START key is illuminated.
Notified the cooking mode, status and completion by illumination.
●When the KNOB is
Rotated : Blue
Pressed : Red
●The START button : In the end setting.
When pressing the key, auto menu list 4~10
will appear.
Time and temperature selection is uncertain.
(page 30~33)
※1
※2
The auto menu consists of Button menu
※1
and Dial
menu
※2
.
As the menu number are displayed on the control
panel, the oven may be used for cooking by press-
ing the appropriate menu number.
AUTO MENU LIST
BUTTON MENU
MANUAL COOKING BUTTON
MENU & SETTING KNOB
CANCEL BUTTON
START HEATING BUTTON
12
WARNING
CAUTION
CLEANING AND MAINTENANCE

Related product manuals