Toshiba GR-RB405WE-PM Series - Folding Glass Shelf

19
1. Raise the shelf (2), and move
the shelf (1) in the direction of the
arrow.
2. The shelf (1) is separated from the
shelf (2).
3. Raise the front end of the shelf
(1) , and move the shelf (2) in the
direction of the arrow.
4. The shelf (2) is moved to the
bottom of the shelf (1), and the
shelf (2) is required to move to the
middle of the refrigeration room,as
shown in Figure 2 on the left.
5. Stack the shelf (2) and shelf (1)
together, and push to the limit
of the liner. Folding operation
completed.
6. Push the folded shelf to the limit
of the refrigeration room.
ઔᡑᆑ౶ ḙᆑ౶ 
෹ᅌ኷݀வՔረү 
 Ѭ䰏ᆑ౶  ˁᆑ౶

 ઔᡑᆑ౶  Ғቫḙ
ᆑ౶  ෹ᅌ኷݀வՔረ
ү
ᆑ౶  ረүᒰᆑ౶
 ʾவḙ᜶ර
ᆑ౶  ረүᒰшᘩࠉ˗
䫀Ꮆḙݠڏ  ᇨ 
ᆑ౶  ˁᆑ౶  ⪷
ஊ҂ʷᡑḙݴ୲ͻ߹ 
࠲୙⪷Ցᄊᆑ౶଎ᒰ
шᘩࠉᬍܫ 
3.4 Folding glass shelf
ᦧ⪷⣨⦰ᆑ᳣
1
(1)
(2)
(1)
(2)
(1)
(1)
(1)
(2)
(2)
(2)
2
Warning
When reassembling shelf (1) and shelf (2), make
sure to connect the frames securely. If it is not
securely connected, it may cause the shelves to
fall off.
The state of the unfolded glass shelf is as
follows:
᝝շ
࡙ဝၕᆑ౶௑ḙ᜶ᆸδᆑ౶  ֗  ᤌଌ
ྪ᭥ḙݠ౧ళᤌଌྪ᭥ḙԻᑟᤵᆑ౶଀
ᗀḛ
࡙Ցᄊဝၕᆑ౶࿄গݠʾḧ
C