Toshiba HWT-601XWHT6W-E - NIGHT Operation Setting; How to set NIGHT operation start and end time

162
<How to set Frost protection operation end time>
• This function is available only for the header remote controller.
1 Press the [ ] / [ ] button to select “Frost protection” on the
MENU screen.
2 Press the [ ] button for 4 seconds or longer to enter the setting mode. The DN code setting
screen appears.
DN_12: End days (Range: 0~20, Default: 0)
13: End times (Range: 0~23, Default: 0)
ex)
Code No. 12: 05
13: 13 = 5 days 13 hours
3 Press the [ ] / [ ] button to select DN or Data, then press the [ ] / [ ] button to set
the value.
4 Press the [ ] button. The set value is registered.
MENU(2/2)
Frost protection
Setting
Information
SET
Anti bacteria
Power consumption
Frost protection
(DN) Data
FIX
Code