Toshiba IP5622-SD User Manual

IP Telephone Installation
Title Page
Effective July 1, 2017, all Telecom product ordering, maintenance, warranty,
and support obligations have been transferred to Mitel Networks, Inc.
February 2015

Toshiba IP5622-SD Specifications

General

Headset Port	Yes
Power over Ethernet (PoE)	Yes
Protocols	SIP
Speakerphone	Full-duplex
Networking	10/100 Ethernet
Codecs	G.711, G.729
Power	PoE or optional AC adapter
Connectors	RJ-45, RJ-9 for headset
Features	Call hold, call transfer, call forward

Summary

Critical System Warnings

Emergency Service (911) and Security Warnings

Critical warnings regarding 911 service availability and system security.

END USER LICENSE AGREEMENT

Agreement Terms, Warranties, and Liability

Covers definitions, grant of license, software terms, intellectual property, warranties, and liability.

Chapter 1 – IP Telephone

Installation and Supported Telephones

Instructions for installing IP Telephones and details of supported models.

Module Installation, Start-Up, and System Connection

Steps for installing add-on modules and the IP telephone start-up sequence.

IP5122-SDC and External Speaker/Ringer

CO Line Connection, Specifications, and Initialization

BESCB1A Options, Installation, and Wiring

Chapter 2 – Programming

Software Requirements, Licensing, and Station Programming

Covers software versions, licensing, over-subscription, and station assignment procedures.

Preference Settings

SUPPORTING ASSIGNMENTS & KEY ASSIGNMENTS

Key Assignments, Network Parameters, and IP Addressing

Chapter 4 – IPT Initialization, Reset and Auto Registration

IPT Initialization and VIPedge/IPedge Connection Process

Describes the initial setup and registration process for IP Telephones with VIPedge/IPedge.

Server Discovery and Registration Status