Need help?Do you have a question about the Toshiba IDM5060 and is the answer not in the manual?
General| Lines | 6 |
|---|---|
| Headset Jack | Yes |
| HD Voice | Yes |
| Power over Ethernet (PoE) | IEEE 802.3af Power over Ethernet (PoE) |
| Protocols | SIP |
| Power | IEEE 802.3af Power over Ethernet (PoE) or optional AC adapter |
| Supported Codecs | G.711, G.722, G.729 |
| Weight | 0.8 kg |
Instructions for installing IP5000-series IP Telephones on IPedge and VIPedge systems, including cautions.
Details the IP5000-series telephones and Add-On Modules supported by IPedge and VIPedge systems.
Lists IP5000 series IP Telephone models, their part numbers, and descriptions.
Provides physical dimensions for IP5000-series telephones and add-on modules.
Explains power options (local supply, PoE) and cabling requirements for IP5000-series IPTs.
Identifies and explains the function of various connectors on IP5000-series telephones.
Details power consumption ratings for IP5000-series telephones and add-on modules via PoE.
Provides instructions for wall mounting IP5000-series telephones.
Guides on attaching and connecting add-on modules (ADMs) to IP5000-series telephones.
Describes the initialization sequence for IP5000-series telephones upon connection to power.
Explains the process of connecting IP Telephones to IPedge or VIPedge systems.
Outlines the procedure to reset IP Telephones to their factory default settings.
Details the feature key for accessing Analog Central Office (ACO) lines on the IP5122-SDC.
Introduces the BESCB1A amplifier and its uses for paging, talk-back, or loud ringing.
Specifies the required IPT software versions for IPedge and VIPedge systems.
To Next Page