2-7-9. Motor
Stator
& Cylinder Sub Ass’y
2-8. Main Deck Removal & Reassembly
1)
Reinstall the motor stator (D toward the FPC cable of
cylinder sub ass’y
Q.
2)
Secure with three(3) screws. (Refer to Fig.
17)
.
@
MOTOR
-
STA
-
@
CYLINDER
SUB
ASS’Y
,TOR
Fig. 26 Assembly of Motor Stator & Cylinder Sub Ass’y
SLOTS1
2-8-l. Slide Rack Housing Removal
1)
Lift the slide rack housing in the direction of arrow.
SLIDE RACK HOUSING
Fig. 27 Slide Rack Housing Removal
2-8-2. Assembly of Slide Rack Housing & Gear
Master
1)
Confirm that the hole of gear master @ and the hole ‘A
of main base are aligned correctly. (Eject mode)
2) Align the slot
#l
of gear master
a
with the tooth
#l
of
slide rack housing. (Refer to timing point)
<DETAIL>
@
GEAR MASTER
@
SLIDER RACK
HOUSING
<TOP VIEW>
ARM
‘R
<SIDE VIEW>
Fig. 28 Assembly of Slide Rack Housing & Gear Master
2-17
To Next Page
Loading...
