3-2. TAPE TRANSPORT SYSTEM
3-2-l. Location of Tape Transport Adjustment (Adjustment Reference)
The lower flange height of the tape guide is used as the basic reference point for transport adjustments.
To keep the height of the tape guide, do not apply excessive force onto the main base to prevent damage.
FULL ERASE
TENSION POLE
PINCH ROLLER
#l
GUIDE POLE
ADJUSTING :
-
CHECKING :
I-]
SUPPLY
KEEL
DISK
TAKE UP REEL DISK
Fig. 1 Location of Tape Transport Adjustment
F/E
HEAD
CYLINDER ASS’Y
PINCH ROLLER
GUIDE ROLLER
‘r
REVIEW POLE
#3
GUIDE SHAFT
CAPSTAN SHAFT
Fig. 2 Tape Travel Diagram
3-3
To Next Page
Loading...
