OPERATION
Press Memory to program and choose up to three cooking procedures.Each
procedure will be indicated by 1, 2 or 3 in the display.
Press Memory until your desired procedure number appears in the display.
Press to begin it. A maximum of two cooking stages can be set for each
procedure.
To program a procedure, follow the steps listed below. Example: Cook food at
80% Power Level for 3 minutes and 20 seconds; save as memory 2.
14. MEMORY FUNCTION
(1)
(2)
(3)
Press "Memory" twice; screen displays 2.
Press "Time Cook" , then press "3" , "2" and "0" in order.
Press "Power" once, then press "8" for "PL 8" to display.
Press to save the procedure. Oven beeps once.
Or press twice directly to save and start cooking.
To choose the procedure from the memory list, press Memory twice.
Screen will display "2". Press to run procedure.
a.
b.
c.
d.
e.
NOTE:
Auto Menu cannot be set in Memory function.
At most 2 stages can be set for cooking. If one stage is Defrost, it will automatically
set to be the first stage.
15.Muti-Stage Cooking
EXAMPLE: 80% Power Level for 5 minutes followed by 60% Power Level for 10
minutes; saved as memory 3.
NOTE: Auto Menu cannot be set in Multi-stage Cooking.
Press "Memory" 3 times; screen displays 3.
Press "Time Cook", then press "5" , "0" and "0" to set first stage cook time.
Press "Power"once, then press "8" to choose 80% first stage cooking
power.
Press "Time Cook" again, then press "1", "0", "0" and "0" to set second stage
a.
b.
c.
d.
cook time.
To Next Page
Loading...
Need help?
General
