EN-15
OPERATION
11 power levels are available. Press “POWER” to select Level 10. Press the digit on
the Control Panel to select Level 9 to 0. When you select “PL0”, there is no power,
only FAN will work to remove odor in the cabinet.
1. MICROWAVE POWER LEVEL*
Power 100% 90% 80% 70% 60% 50% 40% 30% 20% 10%
Level 10 9 8 7 6 5 4 3 2 1 0
PL10Display PL9 PL8 PL7 PL6 PL5 PL4 PL3 PL2 PL1
0%
PL0
a. The clock system is 12-hour system.
b. Press “CLOCK” will display.
c. Press the number keys and enter the current time. For example, time is 12:10 now,
please press “1, 2, 1, 0” in turn.
d. Press “CLOCK” to finish clock setting. “:” will flash and the clock will be lighted.
e. If the numbers input are not within the range of 1:00--12:59, the setting will be
invalid until valid numbers are input.
2. CLOCK SETTING
a. Press “KITCHEN TIMER” the screen will display 00:00.
b. Press the number keys and enter the timer time. (The maximum setting time is
99 minutes and 99 seconds.)
c. Press “START/+30SEC.” to confirm setting.
d. When the timer time arrives, the buzzer will ring 5 times.
If the clock has been set (12-hour system), the screen will display the current time.
3. KITCHEN TIMER
• In the process of clock setting, if the “STOP/CANCEL” button is pressed
or if there is no operation within 1 minute, the oven will go back to the
former setting automatically.
• If the clock need to be reset, please repeat step b to step d.
NOTE
• The kitchen timer is different from 12-hour system. Kitchen Timer is for
you to count down the cooking time, when the cooking is not doing by
the oven.
• During kitchen timer, any program cannot be set.
NOTE
* The Microwave Power Level could only be set after setting the cooking time.
Please refer to ||MICROWAVE COOK for reference.
To Next Page
Loading...
Need help?
General
