EasyManuals Logo

Toshiba ML-EM25P(SS)/CA User Manual

Toshiba ML-EM25P(SS)/CA
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
EN-20
INSTRUCTION FOR USE
OPERATION
a. In cooking state, press “CLOCK”, the screen will display clock for three seconds.
b. In the microwave cooking state, press “POWER” to inquire microwave power level,
and the current microwave power will be displayed. After three seconds, the oven
will turn back to the previous state. In multi-stage state, the inquiring way can be
done by the same way as above.
12. INQUIRING FUNCTION
a. Press “0(Memory)” to choose memory 1-3 procedure. The screen will display 1, 2, 3.
b. If the procedure has been set, press “START/ +30 SEC.” to use it. If not, continue to
set the procedure. Only one or two stages can be set.
c. After finishing the setting, press “START/ +30 SEC.” once to save the procedure. If
press “START/ +30 SEC.” again, it will start cooking.
Example: To set the following procedure as the second memory, that is memory 2.
To cook the food with 80% microwave power for 3 minutes and 20 seconds.
The steps are as follow:
In waiting state, press “0(Memory)” twice, stop pressing until the screen displays “2”.
Press “TIME COOK” once, then press “3”,”2”, “0” in order.
Press “POWER” once, “PL10” displays, then press “8” and “PL8” displays.
Press “START/ +30 SEC.” to save the setting. Buzzer sounds once and “2” displays.
If you press “START/+30SEC.” again, the procedure will be saved as the memory
2 and operated.
If the electricity is not cut off, the procedure will be saved all the time. If it is,
the procedure need to reset.
If you want to run the saved procedure, in waiting state, press “0(Memory)” twice,
screen displays “2”, then press “START/+30SEC.” to run.
11. MEMORY FUNCTION
When the cooking is over, the buzzer will sound 5 “beep” to alert user the cooking
is finished.
13. COOKING END REMINDING FUNCTION
a. In standby state, if the set clock digital tube displays current time, the icon “ : “
would flash. Otherwise, it shows “0:00“.
b. In setting function state, the screen displays corresponding setting.
c. In working or pause state, the screen displays surplus cooking time.
14. OTHER SPECIFICATIONS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba ML-EM25P(SS)/CA and is the answer not in the manual?

Toshiba ML-EM25P(SS)/CA Specifications

General IconGeneral
BrandToshiba
ModelML-EM25P(SS)/CA
CategoryMicrowave Oven
LanguageEnglish

Related product manuals