To Next PageTo Next Page
Need help?Do you have a question about the Toshiba MMD-AP0561BH and is the answer not in the manual?
General| Brand | Toshiba |
|---|---|
| Model | MMD-AP0561BH |
| Category | Air Conditioner |
| Language | English |
Overview of the Heat Recovery Type system.
Identification of various indoor unit models.
Identification of various outdoor unit models.
Safety measures for unit installation.
Safety measures during unit operation and handling.
Identification of parts for various indoor units.
Identification of parts for the outdoor unit.
Explanation of indicators on the remote controller display.
Explanation of remote controller buttons and functions.
Steps for initial setup and basic air conditioner operation.
Optimal flap settings for cooling and heating modes.
Using the remote to adjust air direction and swing.
Explanation of timer types and how to set/cancel them.
Guidelines for selecting a suitable installation location.
Requirements and precautions for electrical wiring.
Procedure for cleaning the air filter.
Recommended daily maintenance tasks.
Pre-operation checks and system performance characteristics.
Places to avoid for re-installation to prevent issues.
Identification and causes of common operational symptoms.
Procedure for confirming and checking error codes.
List of optional and included accessory parts.
Important safety warnings related to installation.
Broad safety guidelines for handling and installation.
Necessary tools and precautions for R410A refrigerant installation.
Guidelines for unit installation space and clearances.
Locations to avoid for proper installation and operation.
Instructions for safe handling and lifting of the outdoor unit.
Safety and installation guidelines for outdoor units.
How to arrange and connect multiple outdoor units.
Steps for connecting refrigerant pipes.
Examples of valve and pipe connection techniques.
Guidelines for selecting pipe materials and sizes.
Principles and considerations for electrical wiring.
Requirements for connecting the main power supply.
How to connect power and control wires to units.
Visual representation of system electrical wiring.
Procedure for automatic indoor unit address setup.
Manual setup of addresses using switches or remote.
Guidelines for connecting multiple indoor units to an FS unit.
Procedure for setting the item code for connected units.
Configuring an indoor unit for cooling-only operation.
Steps for performing a test operation of the unit.
Performing test operations via outdoor unit switches.
Understanding error codes from segment displays.
List and explanation of outdoor unit check codes.
Understanding refrigerant concentration limits in rooms.
