To Next PageTo Next PageWhy won't the compressor start on my Toshiba Air Conditioner?
If the compressor of your Toshiba Air Conditioner won't start, consider these possibilities: * It might be within the 3-minute delay period after a compressor shutdown. * The air conditioner might have thermo OFF. * It could be operating in fan mode or set on a timer. * The system might be undergoing initial communication.
Why won't the indoor fan stop on my Toshiba Air Conditioner?
If the indoor fan of your Toshiba Air Conditioner won't stop, it might be performing the elimination of residual heat as part of the air conditioner shutdown process after heating operation.
Why won't the indoor fan start on my Toshiba MMU-AP0124MH-E Air Conditioner?
If the indoor fan of your Toshiba Air Conditioner won't start, it could be due to cold air discharge prevention control, which is a part of the heating process.
Why does the outdoor fan on my Toshiba MMU-AP0124MH-E not start or change speed?
If the outdoor fan of your Toshiba Air Conditioner doesn't start or changes speed unexpectedly, it might be due to cooling operation under low outside temperature conditions or during a defrosting operation.
General| Brand | Toshiba |
|---|---|
| Model | MMU-AP0124MH-E |
| Category | Air Conditioner |
| Language | English |
Defines the qualifications and knowledge required for installers and service personnel.
Explains protective gear requirements and safety indications.
Explains the meaning of illustrated safety marks and indications.
Wiring diagram for the compact 4-way cassette type indoor unit.
Wiring diagram for the 1-way cassette (compact type YH) indoor unit.
Wiring diagram for the concealed duct standard type indoor unit.
Wiring diagram for the slim duct type indoor unit.
Wiring diagram for the ceiling type indoor unit.
Wiring diagram for the floor standing cabinet type indoor unit.
Lists parts and their ratings for various indoor unit types.
Diagram illustrating the refrigerant flow within the indoor unit.
Explains the control functions and specifications for indoor units.
Block diagram of the indoor unit's control circuitry.
Block diagram for systems using main, sub, or wireless remote controllers.
Details on controlling the system via the remote controller interface.
Overview of troubleshooting procedures, tools, and initial checks.
Details the troubleshooting method using check codes and displays.
Lists and explains various error check codes for indoor, outdoor, and central control units.
Procedures for replacing indoor unit P.C. boards and handling EEPROM data.
Important considerations before and after P.C. board replacement.
Procedures for detaching parts like air intake grille and electrical cover.
Procedures for detaching parts like air intake grille and electric parts cover.
Procedures for detaching air filter and plate inlet parts.
Procedures for detaching electrical control box and fan assembly.
Procedures for removing electrical control assembly and heat exchanger.
Exploded view and parts list for the 1-way cassette (YH) type indoor unit.
Exploded view and parts list for the 1-way cassette (SH) type indoor unit.
Exploded view and parts list for the compact 4-way cassette type indoor unit.
Exploded view and parts list for the slim duct type indoor unit.
Exploded view and parts list for the concealed duct standard type indoor unit.
Exploded view and parts list for the floor standing cabinet type indoor unit.
