To Next PageTo Next Page
Need help?Do you have a question about the Toshiba MMU-AP0181H and is the answer not in the manual?
General| Cooling Capacity (kW) | 5.0 |
|---|---|
| Heating Capacity (kW) | 5.6 |
| Power Source | 220-240V, 50Hz |
| Energy Efficiency Ratio (Cooling) | 3.21 |
| Energy Efficiency Ratio (Heating) | 3.61 |
| Refrigerant | R410A |
| Weight (Indoor Unit) | 9 kg |
| Weight (Outdoor Unit) | 35 kg |
| Type | Split System |
| Noise Level (Outdoor) | 50 dB |
Covers warnings on installation, use, moving, and general cautions.
Details parts of various indoor unit types like cassette, duct, high wall.
Identifies parts of the outdoor unit.
Identifies parts of the remote controller.
Explains how to start, select mode, air volume, and temperature.
Instructions for setting airflow direction and swing for various unit types.
Explains the types of timers and how to set them.
Specifies installation site requirements and electrical wiring procedures.
Explains air filter cleaning and general unit care.
Details operational checks, conditions, and performance characteristics.
Instructions for setting addresses and configuring multi-unit systems.
Cautions and procedures for connecting multiple indoor units to a single FS unit.
Steps for conducting test operations using the remote controller or outdoor unit interface.
Guides on identifying and resolving common operational issues and error codes.
Covers mounting and connecting the Flow Selector unit.
Details pipe connection, material selection, and pressure testing.
Covers system wiring diagrams, power supply specs, and wire sizing.
Details how to connect power and control wires to various indoor unit types.
Details the importance of checking refrigerant concentration limits in installation rooms.
