omm ocating desired scene
®
This unit will allow you to zoom in on the frame image.You
can then make selections by switching the position of the
frame.
I t
Use the title, chapter and time recorded on the DVD disc
to locate the desired point to playback. In the case of
VCD/Audio CD disc, time and track are used to locate the
desired point to playback.
To check the title, chapter/track and time, press DISPLAY.Press ZOOM during playback.
The center part of the image will be
'z"gg_ zoomed in.
O Each press of ZOOM will change the
ZOOM O,1 (x 1.3), 0,2 (x 1.5) and
0,3 (x 2.0).
1
Press _,lv141_ to view a different part of the
frame.
You may move the frame from the
center position to UP, DOWN, LEFT or
RIGHT direction.
In the zoom mode, press ZOOM repeatedly toreturn to a 1:1 view (0, Off).
INPUT
ZOOM
0
Notes:
• You can select the Pause, Slow or Search playback in the
zoom mode.
• Some discs may not respond to zoom feature.
1
Press JUMP during playback or resume stop
mode.
F---, Titlo ---I
Chapter ---
Time --:--:--
Press Number buttons (0-9) to input the
number.
(329(i) (K) Tit_e ---
Chapter 12 ]
(_ (_) (_) Time --;--;--
rid
If you input a wrong number, press
CANCEL.
Refer to the package supplied with
the disc to check the numbers.
Press ENTER. Playback starts.
When you change the title, playback
starts from Chapter 1 of the selected
title.
Some discs may not work in the
above operation.
Notes:
• In case of the Audio CD and Video-CD, only Track and Time
can be selected.
• In case of the Video-CD playback with PBC, the JUMP does
not work. See "To turn off the PBC"_.
®
I
54
5h40 0 Aindb 54 ÷
12'21 2006 11:i8:33 AM
To Next Page
Loading...
