®
r SYMPTOMS CAUSE POSSIBLE SOLUTIONS I PAGE'_
VCR
Place apiece of adhesivetape ever the
TV recording does not work. hole.
Timer recording does not
work.
Noise bars appear on the
screen.
DVD
The video cassette's erase prevention
tab is broken off.
The time is not set correctly.
The recording start/end time is not set
correctly.
The TIMER REC button is not pressed
(theTIMER REC indicator is not lit).
Tape is old or worn.
Tracking adjustment is beyond range of
automatic tracking circuit.
Video heads are dirty.
Reset the present time.
Reset the start/end time.
Press theTIMER REC button (the
TIMER REC indicator is lit).
Replace the tape.
Adjust tracking manually using the TRK
+/- buttons on the remote control.
Clean the video heads.
The playback picture has
occasional distortion.
The unit does not start
playback.
Eject the disc and clean it.
Sometimes a small amount of picture
distortion may appear.This is not a
malfunction.
The disc is dirty.
It is in fast forward or fast reverse
playback.
No disc is inserted.
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not placed within the guide.
The parental lock function is set.
It is in the mode of repeat playback,
memory playback, etc.
The function is prohibited with the unit
or the disc.
Insert a disc.
Insert a playable disc (Check the disc
type and color system).
Place the disc with the playback side
down.
Place the disc correctly inside the guide
on the disc tray.
Cancel the parental lock function or
change the parental lock level.
These operations may prevent a
proper progress of the contents.
Playback does not follow the
course of the disc's program.
'%' appears on the screen. - 9
REMOTE CONTROL
Remote control does not
operate.
The remote control is not aimed at the
sensor.
Distance is too far or too much light in
the room.
There is an obstacle in the path of the
beam.
The batteries are weak.
The batteries are not inserted correctly.
Aim the remote control at the remote
sensor.
Operate within 5 m or reduce the light of
the room.
Clear the path of the beam.
Replace the batteries.
Insert correctly.
4O
20,21
47
47
42
44
8
51
9
51
51
70, 71
12
12
12
12
12_
o
tD
®
I 5Y40101A indb 75
÷
12'21-006 11:I8_1tAM I
To Next Page
Loading...
