User’s Manual D-2
Certification agencies
In Europe, two conductors power cords must be VDE type, H05VVH2-F or
H03VVH2-F; while three conductorsbe VDE type, H05VV-F.
For the United States and Canada, two pin plug configuration must be
2-15P (250V) or 1-15P (125V); while three pin be 6-15P (250V) or 5-15P
(125V) as designated in the U.S. National Electrical code handbook and
the Canadian Electrical Code Part II.
The following illustrations show the plug shapes for USA, Australia Can-
ada, United Kingdom, Europe, and China.
Europe:
Austria: OVE Italy: IMQ
Belgium: CEBEC The Netherlands: KEMA
Denmark: DEMKO Norway: NEMKO
Finland: FIMKO Sweden: SEMKO
France: LCIE Switzerland: SEV
Germany: VDE United Kingdom: BSI
Outside of Europe:
U.S. and Canada: UL listed and CSA certified
No. 18 AWG, Type SVT or SPT-2
China: CCC, CQC India: STQC
Australia: AS
To Next Page
Loading...
