User’s Manual 3-11
Getting Started
3. Press the power button. This feature must be enabled.
When you turn the power back on, you can continue where you left when
you shut down the computer.
Standby Mode limitations
Standby Mode will not function under the following conditions:
■ Power is turned back on immediately after shutting down.
■ Memory circuits are exposed to static electricity or electrical noise.
Restarting the computer
Certain conditions require that you reset the computer, for example if:
■ You change certain computer settings.
■ An error occurs and the computer does not respond to your keyboard
commands.
If you need to restart the computer, there are two ways this can be
achieved:
1. Click Start then click Turn Off Computer. From the Turn Off Computer
menu select Restart.
2. Press the power button and hold it down for five seconds. Wait ten to
fifteen seconds, then turn on the power again by pressing the power
button.
System Recovery Options
■ When the computer is in Standby Mode, the Power indicator will blink
amber.
■ If you are operating the computer on battery power, you can lengthen
the overall operating time by turning it off into Hibernation Mode -
Standby Mode will consume more power while the computer is off.
■ If your operating system is selected from bilingual operating system,
you are not able to use "TOSHIBA Recovery Disc Creator" to create
optical recovery discs or restor the preinstalled software from the
recovery HDD, please use the bundled Recovery DVDs directly.
■ You can use TOSHIBA Recovery Disc Creator when you connect
External ODD.
To Next Page
Loading...
