Toshiba NB200 - Wimax Module (Optional); Removing the Wimax Module; Installing the Wimax Module

4 Replacement Procedures Error! Style not defined. Error! Style not defined.
4.15 WiMax Module (Optional)
Removing the WiMax Module
Remove the WiMax module according to the following procedures and Figure 4.32.
1. Disconnect the two antennas from their connectors on the WiMax card with balance
force.
2. Remove two M2x3 screws from the WiMax module.
M2x3*2
Figure 4.32 Removing the WiMax module
3. Pull the WiMax module out at an angle.
Installing the WiMax Module
Install the WiMax module according to the following procedures.
1. Insert the WiMax module into the connector at an angle.
2. Secure the WiMax module with two M2x3 screws.
3. Attach the two antennas to their connectors on the WiMax card with balance force.
NB200 Maintenance Manual 4-40