User’s Manual 6-2
Power and Power-Up Modes
Table 6-1 Power conditions continued
Monitoring of power condition
As shown in the below table, the Battery, DC IN and Power indicators on
the system indicator alert you to the computer’s operating capability and
battery charge status.
Battery indicator
Check the Battery indicator to determine the status of the battery pack.
The following indicator lights indicate the battery status:
AC adaptor
not
connected
Battery charge
is above low
battery trigger
point
• Operates
• LED: Battery off
DC IN off
Battery charge
is below low
battery trigger
point
• Operates
• LED: Battery flashes
orange
DC IN off
Battery charge
is exhausted
Computer shuts down
No battery
installed
• No operation
• LED: Battery off
DC IN
off
Power on Power off
(no operation)
Flashing orange The battery charge is low, the AC adaptor must
be connected in order to recharge the battery.
Orange Indicates the AC adaptor is connected and the
battery is charging.
White or green Indicates the AC adaptor is connected and the
battery is fully charged.
No light Under any other conditions, the indicator does
not light.
If the battery pack becomes too hot while it is being charged, the charge
will stop and the Battery indicator will go out. When the battery pack's
temperature falls to a normal range, charging will resume - this process
will occur regardless of whether the computer's power is on or off.
To Next Page
Loading...
