EasyManua.ls Logo

Toshiba PORTEGE Z20t-B Series - Changing the Screen Orientation

Toshiba PORTEGE Z20t-B Series
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The display screen of some models is a touch sensitive, digitizer
screen, and works with a stylus pen. However, the outer edges of the
screen might be less sensitive. Keep the Stylus Pen or the Reserve
Pen inside the display area when you use it near the edges of the
display screen. The position of the pen might not be recognized if you
move the pen too fast towards the outer edge. Make sure to slide the
pen slowly in areas near the edges of the screen. Use the pen in the
areas enclosed by the dotted line as shown in the following figure.
Figure 4-2 Use area of the pen
Changing the screen orientation
When operating the computer in tablet mode, you can change the screen
orientation by rotating the computer sideways. The screen orientation
automatically changes according to the rotation angle detected.
Figure 4-3 Rotating the computer sideways
1. Landscape mode
2. Portrait mode
To manually disable the automatic screen orientation, do the following:
1. In the Settings charm, click Screen.
2.
Click , and appears indicating that the automatic screen
orientation is currently disabled.
When operating the computer in laptop/presentation mode, however, the
automatic screen orientation is locked, and stays in landscape mode.
User's Manual
4-2

Table of Contents

Related product manuals